First, you may have a few questions that can be answered by email,(see contact Infinity in the website) or by phone. Call Steve at 949 661-6699. If you live in So. Cal. You can easily try a demo ski at San Onofre. When you decided to order, I must know your leg length. You can save time by measuring your leg length as shown next.

Wave Ski Price List

$1400 EPS/epoxy construction - Infinity V- Bottom or Infinity Tri-hull.
$1400 EPS/epoxy construction - Infinity Stinger or Infinity Mosquito.
$2600 EPS/epoxy - Infinity tandem (5 ½" thick and 27" to 30" wide) up to 350 lb. capacity
$2800 EPS/epoxy - Infinity tandem (6 ½" thick and 32" wide) up to 450 lb. capacity
$3000 EPS/epoxy - Infinity tandem (7 ½" thick and 33" wide) up to 500 lb capacity

*Prices include foot straps, a waist strap or thigh straps, a fin and clear (white) color.
 EPS cannot be airbrushed, but beautiful solid colors can be applied in the lamination for between $100 to $200.

How to measure your leg length

You need 4 pieces of 2"x 4" lumber each 12" long. Place two of the pieces about 7" apart on the floor. Sit on the floor facing the ends of the 12" boards. Place your bare feet against the ends. Next, stack two of the pieces one on top of the other on their side edges. This will create a 2" x 7" that is 12" long. Slide these stacked pieces under your knees and let you legs rest on them. (On the average, men like a knee rise of about 7", and shorter women like a knee rise of 5" to 6"). Make sure that your feet are up against the first two pieces. Now, press the last 2 x 4 (on its edge) against your back side making sure that its edge is flat on the floor. With out moving any of the wood, stand up. Make sure that all of the pieces of wood are square to each other in order to get an accurate measurement. Measure the distance between the pieces that were against your feet and the piece behind your back. This is your leg length for a wave ski.

2x7 Under Knees

Wave Ski Photo Gallery >>